For Better Performance Please Use Chrome or Firefox Web Browser

Dr.Masoud Haghshenasfard

Associate Professor of Chemical Engineering

Welcome to Dr.Masoud Haghshenasfard

No front page content has been created yet.

Office : Department of Chemical Engineering, Isfahan University of Technology, 84156-83111 Email : haghshenas@cc.iut.ac.ir Phone : +98 31 33915647 Fax : +98 31 33912677 Web Site : Dr. Masoud Haghshenasfard

Faculty Member, Chemical Engineering Department
Director of transport phenomena group

Research Fields : Computational Fluid Dynamics (CFD)

Simulation-Mathematical Modeling, and Optimization

Heat and mass transfer in nanofluids-Microflows and Nanoflows

Multiphase fluid flow

Teaching

Recent Publications

H. Alikhani, M. Haghshenasfard, M. Sattari Najafabadi, Experimental investigation of liquid-liquid extraction and 3-phases gas-liquid-liquid flow in a microchannel, Petroleum Research, 32, (2022)

L. Rostami, M. Haghshenasfard, M. Sadeghi, M. Zhiani , A 3D CFD model of novel flow channel designs based on the serpentine and the parallel design for performance enhancement of PEMFC, ENERGY, 258 (2022).

1- M. S. Emami, M. Haghshenasfard, R. Zarghami, R. Sadeghi, M. Nasr Esfahany, CFD Simulation and Experimental Study of Antisolvent Crystallization Through Impinging Jets for Synthesis of Nanodrug Particles, Molecular Liquid, 367 (2022).

3- P. Akbari, M. Haghshenasfard, M. Nasr Esfahany, M. Ehsani, Mass transfer characteristics of magnetic nanofluids flowing through a Y-type microchannel under a magnetic field, Int. Comm. Heat Mass Trans.,129 (2022)

M. Khani, M. Haghshenasfard, N. Etesami, M. R. Talaei, CO2 absorption using ferrofluids in a Venturi scrubber with uniform magnetic field of a solenoid, Journal of Molecular Liquids, 116078 (2021).

B. Hooshdaran, M. Haghshenasfard, S. H. Hosseini, M. Nasr Esfahany, G. Lopez, M. Olazar , CFD modeling and experimental validation of biomass fast pyrolysis in a conical spouted bed reactor, Journal of Analytical and Applied Pyrolysis, 154 (2021).

M. Liravi, M. Mohamadi, M. Haghshenasfard, A. Khazali, Sarvi, ezvaji, Simulation and analysis of dew point regulation unit process of a gas refinery and use of propane cycle to achieve optimal conditions, Petroleum Res.,2021

F. Karimi, M. Haghshenasfard, M. Sotudeh-Gharebagh, R. Zarghami, N. Mostoufi, Multiscale characterization of nanoparticles in a magnetically assisted fluidized bed, Particuology, 51 (2020).

E. Fathi, M. Haghshenasfard, M. Nasr Esfahany, CFD simulation and experimental validation of nanoparticles fluidization in a conical spouted bed, Chem. Eng. Res. Des, 160 (2020).

M. S. Emami, M. Haghshenasfard, R. Zarghami, R. Sadeghi, M. Nasr Esfahany, Experimental study on the reduction of loratadine particle size through confined liquid impinging jets, Int. J. Farmaceutics., 587 (2020).

N. Mohammadzadeh, R. Rafieian, M. Haghshenasfard, M. Nasr Esfahany, T. Tavakoli, Effect of magnetic field on CO2 absorption in nanofluids in a bubble column, Journal of Separation Science and Engineering, 11 (2020).

M. Babaei, S. Gh. Etemad, M. Haghshenasfard, B. Kruczek, E. J. Morante, J. Thibault, Water extraction from air via passive plate condensation, Potential and limitations, Journal of Fluid Flow, Heat and Mass Transfer, 7(2020).

N. Abbaspour, M. Haghshenasfard, M. R. Talaei, H. Amini, Experimental investigation of using nanofluids in the gas absorption in a Venturi scrubber equipped with magnetic field, Journal of Molecuar Liquids, 112689 (2020).

G. Lopez, J. Alvarez, M. Amutio, B. Hooshdaran, M. Haghshenasfard, S.H. Hosseini, M. Olazar, Kinetic modeling and experimental validation of biomass fast pyrolysis in a conical epouted reactor, Chemical Engineering Journal, 373 (2019).

M. Abedi, M. Haghshenasfard, M.B. Salehi, A.M. Moghadam, M. Vafaei, Effect of Inorganic Polymer Gel Systems on Residual Resistance Factor in Fractured Core Model, Iranian Journal of Chem. and Chem. Eng. (2019)

J. Alvarez, B. Hooshdaran, M.Cortazar, M. Amutio, G. Lopez,F. Freirec, M. Haghshenasfard, S. Hosseini, M. Olazar, Valorization of citrus wastes by fast pyrolysis in a conical spouted bed reactor, FUEL,Volume 224, Pages 111-120 (2018)

F. Rajabzadeh, M. Haghshenasfard,M. Nasr esfahany, H. Salimi, An Experimental Investigation of Pool Boiling Characteristics of Alumina-Water Nanofluid over Micro/Nano-Structured Surfaces, Heat Transfer Engineering, DOI: 10.1080/01457632.2018, (2018).

Robert Muggleton, M. Haghshenasfard, K. Hooman, Numerical simulation of mixture homogenization through jet impingement on cylindrical obstacles, Fluid Dynamics Research, (2018).

M. Abedi, M. Haghshenasfard, M. Vafaei Sefti, M. B. Salehi, A. M. Moghadam, Numerical modeling and experimental investigation of inorganic and organic crosslinkers effects on polymer gel properties, Journal of Petroleum Science and Engineering, 160(2018)

M. Abedi, M. Haghshenasfard, M. Vafaei Sefti, M. B. Salehi, A.Heidari, Experimental study of swelling and rheological behavior of preformed particle gel used in water shutoff treatment, Journal of Petroleum Science and Engineering, 169, (2018).

F. Rajabzadeh, M. Haghshenasfard, M. Nasr Esfahany, H.Salimi Jazi, Experimental investigation of time and repeated cycles in nucleate pool boiling of alumina/water nanofluid on polished and machined surfaces, Heat and Mass Transfer ,10.1007/s00231(2018)

Y. Amini, J.K. Sabet, M. Nasr Esfahany, M. Haghshenasfard, Experimental and numerical study of mass transfer efficiency in new wire gauze structured packing, Separation Science and Technology, (2018).

M. Ansaripour, M. Haghshenasfard, A. Moheb, Experimental and Numerical Investigation of CO2 Absorption Using Nanofluids in a Hollow-Fiber Membrane Contactor, Chemical Engineering Technology, 10.1002/ceat.201700182, (2018)

F. Karimi, M. Haghshenasfard, R. Sotudeh, R. Zarghami, N. Mostofi, Enhancing fludization quality of nanoparticles using external fields, Advanced Powder Technology, 29, 12 (2018).

H. Rezaei, M. Haghshenasfard, A. Moheb, Optimization of Dye Adsorption using Fe3O4 Nanoparticles Encapsulated with Alginate Beads by Taguchi Method, Adsorption Science& Technology, Vol. 35(1–2) 55–71(2017)

B. Hooshdaran, S. H. Hoseini, , M. Haghshenasfard, M. Nasr Esfahany, M. Olazar , CFD Modeling of heat transfer and hydrodynamics in a draft tube conical spouted bed reactor under pyrolysis conditions, Applied Thermal Engineering, 2017.

R. Sadeghi, M. Haghshenasfard, S. Gh. Etemad, E. Keshavarzi, Theoretical investigation of nanoparticles aggregation effect on Water-alumina laminar convective heat transfer, International Communication in Heat and Mass Transfer,vol.72, 57-63, (2016).

R. Sadeghi, M. Haghshenasfard, S. Gh. Etemad, E. Keshavarzi, Investigation of alumina nanofluid stability using experimental and modified population balance methods, Advanced Powder Technology, (2016)

M. Haghshenasfard, G. H. Yeoh, M. Dahari, K. Hooman, On Numerical Study of Calcium Sulphate Fouling under Subcooled Flow Boiling Conditions, Applied Thermal Engineering, 10.10.16, (2015)

Y. Amini, M. Mokhtari, M. Haghshenasfard, M.B.Gerdroodbary, Heat transfer of swirling impinging jet ejected from the nozzles with twisted tapes utilizing CFD technique, Case Studies in Thermal Engineering, 6(2015) 104-115

J. Salimi, M. Haghshenasfard, S. Gh. Etemad, CO2 absorption in nanofluids in a randomly packed column equipped with magnetic field, Heat and Mass Transfer, 51(6), 621-629 (2015)

Z.Yarighale, M. Haghshenasfard, M. Nasr Esfahany, Investigation of nanofluids heat transfer in a ribbed microchannel heat sink using single-phase and multiphase CFD models, Int. Comm. Heat and Mass Transfer, 68(2015) 122-129

R. Sadeghi, S. Gh. Etemad, E. Keshavarzi, M. Haghshenasfard, Investigation of alumina nanofluid stability by UV–vis spectrum, Microfluidics and Nanofluidics, 18(5), (2015)

M. Haghshenasfard, K. Hooman, CFD Modeling of Asphaltene Deposition Rate from Crude Oil, Journal of Petroleum Science and Engineering, 1-10, (2015)

M. Khorramifar, M. Haghshenasfard, S. Gh. Etemad, An experimental investigation on the effect of operating conditions on the thermal efficiency of a flat plate solar collector, Journal of Middle East Applied Science and Technology,Issue 24, 803-809, (2014

E. Ekramian, S.Gh. Etemad, M. Haghshenasfard, Numerical Analysis of Heat Transfer Performance of Flat Plate Solar Collectors, Journal of Fluid Flow, Heat and Mass Transfer, Volume 1, 38-42 (2014)

E. Ekramian, S.Gh. Etemad, M. Haghshenasfard, Numerical Investigations of Heat Transfer Performance of Nanofluids in a Flat Plate Solar Collector, International Journal of Theoritical and Applied Nanotechnology, Volume 2, 30-39, (2014)

Z. Samadi, M. Haghshenasfard, A. Moheb, CO2 Absorption Using Nanofluids in a Wetted-Wall Column with External Magnetic Field, Chemical Engineering &Technology, 37(3), (2014)

- H. Sadegh arani, M. Haghshenasfard, j. Salimi, Numerical study on the effect of cavitation on the flow and diesel fuel atomization characteristics, Chemical Engineering& Technology, 36(3), (2013).

I. Khonsha, M. Zivdar, M. Haghshenasfard, Prediction of Pressure Drop and Flooding In the Spinning Cone Distillation Column Using CFD Analysis, Arabian Journal of science and Technology, 10.1007, (2013).

L. Asmaie, M. Haghshenasfard, A. Mehrabani-Zeinabad, M. Nasr Esfahany,Thermal performance analysis of nanofluids in a thermosyphon heat pipe using CFD modeling, Heat and Mass Transfer, 49(1), 667-678, (2013).

M. Akhtari, M. Haghshenasfard, M. R. Talaie, Numerical and Experimental Investigation of Heat Transfer of AL2O3/Water Nanofluid in the Double Pipe and Shell and Tube Heat Exchangers, Numerical Heat Transfer, Part A, (63), 941-958, (2013).

M. Haghshenasfard et al, Numerical simulation of a supercritical CO2 geothermosiphon, International Communication in Heat and Mass Transfer,vol 37, 1447-1451, (2010).

M. Haghshenasfard, CFD modeling of heat transfer of CO2 at supercritical pressures flowing vertically in porous tubes, International Communication in Heat and Mass Transfer, 37, 98-102, (2010)

M Haghshenasfard et al, Numerical study of convective heat transfer of nanofluids in a circular tube, Two-phase model versus single-phase model, International Communication in Heat and Mass Transfer, 37, 91-97, (2010)

M Haghshenasfard , M. Zivdar, The university-industry relations, Iranian Chemical Engineering Journal, 9(52), (2010).

M. Haghshenasfard et al, Numerical Simulation of Hydrodynamics parameters of the Packed Columns: Effects of Geometrical Characteristics on Pressure Drop, Applied Sciences Journal, 7 (11): 1439-1445, (2009)

M. Zivdar, M Haghshenasfard, B. Tanhaei, A. Ayati, Investigation of Liquid Hold-Up and Pressure Drop in the Structure Packings using CFD Modeling, Iranian Chemical Engineering Journal, 8(45), (2009.)

M Haghshenasfard et al, “CFD Simulation of Mass Transfer Efficiency and Pressure Drop in a Structured Packed Distillation Column”, Chemical Engineering &Technology, 30, No7, (2007)

M. Haghshenasfard et al., CFD simulation of Gas distribution Performance of Gas Inlet systems in packed columns, Chemical Engineering &Technology, 30, No9, (2007)

M. Zivdar. M. Haghshenasfard and Prince., “Evaluation of pressure drop and mass transfer characteristics of structured packing for production and separation of food flavors. Part Two: Mass transfer characteristics” IchemE Journal,Food and Bioproducts Proc

M. Zivdar. M. Haghshenasfard and Prince., “Evaluation of pressure drop and mass transfer characteristics of structured packing for production and separation of food flavors. Part One: pressure drop characteristic” IchemE Journal,Food and Bioproducts Proce

M. Zivdar. R. Rahimi, M. Nasr and M. Haghshenasfard” CFD simulations of Pressure drop in KATAPAK-S structured packing, Iranian Journal of Chemical Engineering,Vol.2, No.2 (2005).

M. Haghshenasfard et al., Hydrogenation of CO over a cobalt/cerium oxide catalyst.” Iranian Journal of Science and Technology Vol. 28, N0 .B6 (2004).

M. Haghshenasfard et al., Characterization of Copper- Manganese Oxide Catalyst and their precursors,” Iranian Journal of Chemical Engineering, Vol. 1, No. 2 (2004).